I snagged this Yukon Outfitters Mosquito Hammock from Woot.com at a great price. Woot sells items for a limited time or until inventory is exhausted (which ever comes first). This deal was only limited for 1 day. It was too good to pass up.
From the very beginning, I was going to replace the suspension system of the original hammock. I wanted to use the Dyneema rope I had on hand. I figured I would tie a stopper knot of some kind (or a bend knot at the ends) to make a loop. I did some research on Dyneema rope and found that knots tend to slip on Dyneema because the rope is slippery. Further research, suggested splicing an eye/loop instead of tying a knot. There are great references on how to do exactly that. I was able to splice my own with the tools I had on hand.
I also opted to use two SMC Descending Rings for the suspension system. To connect the hammock suspension to the trees, I ordered some straps from strapworks.com. The straps will be connected to the SMC rings via garda hitch (you’ll need a pair of rings to deploy the garda hitch).
I posted a video of the unboxing and the suspension modification. As stated above, I’m swapping the existing rope and carabiner suspension with a continuous loop of AmSteel Blue (Dyneema) rope and a pair of SMC Descending Rings.
Knots used: lark’s head (cow hitch), prusik hitch, surgeon’s knot, figure-8